money/README.md

# money

A personal finance tracker built around bank statements rather than manual entry.

You keep a **data directory with one folder per account**, drop statement exports
into those folders, and run `money import`. Transactions are extracted and
tagged by glob rules you write.

## Layout

```
~/money/                     # the data root (see "Where the data root lives")
  rules.toml                 # tag rules and transfer definitions, in order
  index.db                   # SQLite index (rebuildable; safe to delete*)
  checking/
    account.toml             # currency + which parser reads this bank's exports
    2026-01.csv
    2026-02.csv
  savings/
    account.toml
    2026-01.csv
```

\* Nothing lives only in the index: it is derived entirely from the statements
plus rules.toml, so deleting it and re-importing gets you exactly what you had.
It is a cache and nothing more, which is why it is never migrated — if a new
build changes its shape, delete it and run `money import` again.

## Where the data root lives

Checked in order, first one wins:

1. `--root DIR` on the command line, before or after the command
2. `$MONEY_ROOT`
3. the `root` key in `$XDG_CONFIG_HOME/money/config.toml`, which is
   `~/.config/money/config.toml` unless `XDG_CONFIG_HOME` says otherwise
4. `~/money`

So the usual setup is to write the config file once and never pass a flag again:

```toml
# ~/.config/money/config.toml
root = "~/documents/finances"
```

A leading `~` is expanded and relative paths are made absolute. `money config`
prints the resolved root and which of the four rules chose it.

## Install

```
go install ./cmd/money
```

Give it the package path, not `cmd/money/main.go`. Naming the file puts the go
tool in file mode: it names the binary after the source file (`main`) and
compiles only the files listed, which breaks the moment the package has two.

That build runs `pdftotext` from `PATH` for the PDF parsers, so the machine
needs poppler-utils. To deploy one file with nothing to install alongside it,
build with `pdftotext` inside:

```
scripts/build-bundled.sh           # → dist/money-linux-amd64
scripts/build-bundled.sh arm64     # → dist/money-linux-arm64
```

It needs podman or docker: `pdftotext` is compiled in a container from a
checksum-pinned poppler release (`scripts/pdftotext.Containerfile`), as a fully
static musl executable with only what text extraction needs, then embedded with
`go build -tags bundled`. The result runs on any Linux of that architecture.
The first PDF import writes the embedded copy to `~/.cache/money/` (or
`$XDG_CACHE_HOME/money/`) and runs it from there; `money config` says which
`pdftotext` is in use. Only Linux on amd64 and arm64 is offered — elsewhere,
install poppler-utils.

Building arm64 from an x86 machine runs the container under emulation, so the
host needs qemu-user-static and the first build is slow; the executable is then
cached under `internal/parser/bundled/` and later builds only rebuild money.

Poppler is GPL, so a bundled binary is GPL-licensed as a whole. That matters
only if you hand the binary to someone else.

## Usage

```
money                        # the web app on 127.0.0.1:8080 (same as `money serve`)
money serve --addr :8080     # listen on every interface (there is no login)
money import                 # extract new transactions from every statement
money import --force         # re-parse statements even if unchanged
money retag                  # re-apply rules.toml: retag, and re-pair transfers
money ls --untagged          # what neither a rule nor a transfer has claimed
money ls --untagged --uniq   # the same, one row per distinct description
money ls --wide              # also show type and reported balance
money ls --account checking --month 2026-01
money report --month 2026-01 # spending by tag
money report --sort count    # ordered by number of transactions, not amount
money accounts               # balances
money parsers                # available statement parsers
money config                 # which data root is in use, and why
```

An account folder appears in the app only once its statements have been
imported — creating an `account.toml` is not enough on its own. Run
`money import` (or press Import in the web app) after adding one, or add its
first statements from the Accounts screen, which imports them as it saves them.

`--uniq` turns `ls` into a list of patterns still to write rather than a list of
rows to read: one line per distinct description, since fifty visits to the same
shop are one glob, not fifty lines. Descriptions print exactly as a glob sees
them — upper-cased with whitespace collapsed — so two statements that worded the
same payee differently collapse into the one row they deserve, and a pattern
written from the list matches what the list showed you.

```
$ money ls --untagged --uniq
DESCRIPTION
INTEREST PAID
KAUFLAND 4412 SOFIA
LIDL SOFIA 4412

3 distinct descriptions
```

The account is not part of what makes a row distinct. A rule matches on the
description and only optionally narrows to an account, so one payee seen on two
accounts is still one pattern to write — and it is one row in the rule builder
on `4`, which groups the same way. Pass `--account` to scope the listing
instead.

It composes with the other filters (`--account`, `--month`, `--search`), and
`--limit` caps the rows printed, saying how many it held back. It cannot be
combined with `--wide`, whose columns all belong to a single transaction.

## The web app

`money serve`, which is also what `money` runs with no command, puts seven
screens in a browser: accounts, transactions, report, rule builder, rules,
transfer builder and transfers. It runs the same code as the CLI: amounts are formatted,
globs matched and transfers paired on the server, and the page only shows the
answers. It is one binary with the page built in; nothing else to deploy.

```
money                            # http://127.0.0.1:8080
money serve --root /srv/money --addr 0.0.0.0:8080
```

**There is no authentication.** Anyone who can reach the port can read every
transaction, rewrite `rules.toml` and start an import, which is why it listens
on loopback unless `--addr` says otherwise. To use it from elsewhere, put it
behind a reverse proxy that does the logging in, or reach it over SSH / a VPN.
Requests that change anything must be sent as JSON, so another website open in
the same browser cannot post a form to it.

The server outlives hand edits to `rules.toml`, so it treats the file the way a
fresh command would:

- **Retag and Import re-read `rules.toml`** (and Import the account folders)
  before running, exactly as `money retag` / `money import` would. Until then a
  banner says the file on disk no longer matches what the index was derived
  from.
- **Edits and deletes check the file first.** They go by rule position, and the
  page also sends the rule it showed you; if `rules.toml` no longer holds that
  rule there (another tab, a hand edit) the change is refused and you are asked
  to reload, rather than editing whichever rule moved into its place.

Shift-click **Import** for `import --force`.

### Statements

The Accounts screen (`1`) also lists every statement file in every account
folder, with what the index made of it:

| Status | Meaning |
| --- | --- |
| `✓` imported | read, and unchanged since |
| `⚠` changed | the file differs from what was imported; Import re-reads it |
| `•` not imported | new since the last import — or an import tried and failed, in which case the error is in the import report |
| `✗` gone from disk | imported once, then removed; its transactions stay in the index only until it is rebuilt |

**Added** is how many transactions the file brought in. Statements that overlap
share rows, and a shared row counts towards whichever file was imported first,
so a later statement covering the same days can add fewer rows than it holds.

Click a file name to open it. PDFs and CSVs open in the browser; anything else
downloads. Only files import would read are listed or served — not
`account.toml`, dotfiles, or anything outside an account's `include` patterns.

### Adding statements from the browser

The Accounts screen (`1`) has an **Add statements** panel: pick the account,
drop files on it (or click to choose them) and press **Upload and import**. The
files are saved into that account's folder, exactly where you would have copied
them by hand, and then imported — the folder stays the source of truth, so
deleting `index.db` and re-importing still gets everything back.

An upload never replaces a statement. A file whose name is already in the folder
is skipped if its contents are identical and refused if they differ; rename it
or remove the old one first. Names import would not read back — dotfiles,
`account.toml`, anything outside an account's `include` patterns — are refused
too, and a batch with one bad file writes none of them. The folder itself must
already exist with an `account.toml`: an upload adds statements to an account,
it does not create one.

### Keys

| Key | Action |
| --- | --- |
| `1` – `7` | accounts · transactions · report · rule builder · rules · transfer builder · transfers |
| `/` | filter by description |
| `u` | show only untagged transactions (matched transfer legs are not among them) |
| `a` | clear the account filter |
| `←` `→` | move the report's period (report) |
| `s` | change how the report is sorted (report) |
| `ctrl+s` | sort the rule builder's preview by name / by count |
| `i` | import · `r` retag |

Inside a form every printable key belongs to the field you are typing in, so
the single-letter keys only work outside one; that is why the builder's sort is
a chord. Clicking an account on `1` filters the transaction list to it.

There is no control that tags a transaction. Tags come from `rules.toml` and
nowhere else, so tagging what you are looking at means writing a rule for it on
`4` — which is why that screen shows you what a glob catches before you save.

### Report (`3`)

The report opens on **last month**, not on everything you have ever imported:
an all-time total is the one number a spending report is least often asked for,
and the month that has just ended is the last one your statements can be
complete for. If you have not downloaded that month yet, the screen says the
period is empty rather than quietly showing you a different one.

The time axis beside the totals runs from the widest window down to the oldest
month in the index — `all time`, `this year`, `last 12 months`, `last 3
months`, `this month`, `last month`, then one entry per month. Click one, or
step along it with `←` and `→`.

The three rolling windows run to the end of *this* month rather than to the
last complete one — you ask for "last 3 months" to see what is happening now,
and leaving out the days since the 1st would answer a different question. Each
month below `last month` is a month the index actually holds; months that a
named window above already covers are not repeated.

Click a column heading, or press `s` to cycle, to change how the rows are
arranged; the marked heading says which one they are arranged by: `Out ▾`
largest spend first (the default question a spending report answers), then
`In ▾`, `Net ▾` lowest first so the biggest losses lead, `N ▾` most
transactions first, and `Tag ▴` A→Z. `money report` takes the same choice as
`--sort out|in|net|count|tag`.

Currency is always the outer grouping and no sort changes that — there are no
exchange rates here, so two currencies interleaved by amount would invite a
comparison between numbers that cannot be compared. Rows that tie fall back to
the tag, so they keep a fixed position rather than shuffling between reloads.
The sort rearranges rows; it never changes which rows there are.

The period narrows the report and only the report. The account, the search and
the untagged toggle are shared with the transaction list, so opening on last
month does not hide the rest of the index from `2`.

`money report` takes `--month` instead; there is no command-line equivalent of
the wider windows.

### Rule builder (`4`)

Writing rules by hand means guessing what a glob will catch. This screen shows
the answer as you type: the form is on the left — glob, account, tag, note —
and on the right the still-untagged descriptions the glob currently matches,
marked `▸`, grouped by description, under a running "*n* of *m* descriptions
match" count.

The list narrows as you type, so what is on screen is what the rule would
claim — nothing else is left there to read past. The count keeps the context
the rows no longer can: *m* is everything still in view, so `2 of 7` says the
glob picked two descriptions out of seven, and `0 of 7` says the glob is wrong.
With the glob still empty there is nothing to filter by, and the list is every
untagged description in the data — which is the other question this screen
answers, and where you go looking for the next thing to write a rule for.
Clicking a description fills the glob with `*THAT DESCRIPTION*`, as a starting
point to narrow down.

`enter` (or **Save rule**) appends the rule to `rules.toml` and retags
immediately, so the rows it caught disappear from the list. The account stays
filled in, since the next rule is usually for the same one.

Clicking the column headings, or `ctrl+s`, switches the list between by name and
by count, most seen first; the `↓` says which column the order is read from.
The two answer different questions: by name finds the payee you are looking at,
by count finds the rule worth writing next, since one pattern claiming forty
rows is worth more than the first of forty claiming one. Ties keep the
alphabetical order, so the list does not reshuffle under you, and the choice
lasts until you change it.

The account and tag fields offer completions as you type. Accounts come from
the folders on disk and the index; tags from every tag in use plus any named in
`rules.toml`, so a tag is completable from the moment a rule mentions it —
which is what stops `groceries` acquiring a `grocery` twin. A new tag is just
typed out in full.

Leaving the account blank applies the rule everywhere; filling it in also
narrows the preview to that account. The preview lists only transactions no
existing rule has already tagged, so it answers "what is still waiting for a
rule" rather than "what would this rule win". Those differ when the new rule is
narrower than an existing one: a `*LIDL SOFIA*` written while `*LIDL*` is
already tagging those rows previews as nothing and still takes them on save,
because the more specific rule wins. Legs of a matched transfer are left out
too: they are already accounted for by the definition that paired them, and the
report leaves them out anyway.

#### Editing a rule

**Edit** on the rules screen (`5`) opens the rule in this same form with the
fields filled in, and saving rewrites that rule where it sits instead of
appending a new one. It keeps its position, since position still breaks ties
between equally specific rules; `rules.toml` is edited textually, so the
comments and formatting around it survive, exactly as when deleting.

An edit is judged against different rows to a new rule. What the rule already
claims is tagged, so none of it would be in an untagged preview and a rule that
works perfectly would preview as nothing; those rows are put back, and any the
new glob stops catching stays on screen marked `−`, under a "*n* no longer
claimed" line, rather than quietly disappearing the way an ordinary non-match
does. Narrowing `*LIDL*` to `*LIDL SOFIA*` therefore shows you the Varna branch
you are about to hand back to whatever rule catches it next.

The form has no `type` field, so a rule that sets one carries it through
unchanged rather than losing it; it is shown under the glob as `+ type:… ·
kept`. Saving lands back on the rules screen with the new counts; **Cancel**,
`esc`, or leaving the screen leaves the rule as it was.

### Rules (`5`)

Every rule in file order — the order they are written in, not the order they
are tried in — with the number of transactions it actually claims. Rules that
claim none are marked `✗`.

```
Rules · 5 rules · 2 match nothing

#      Pattern                Account     Tag         Txns  Note
1      *LIDL SOFIA*           (all)       groceries    3     the weekly shop
2   ✗  *LIDL*                 (all)       shadowed     0
3   ✗  *OLD BANK NAME*        (all)       dead         0     closed in 2025
4      *ZARA*                 (all)       clothes      1
5      *КАУФЛАНД*             checking    groceries    1     4412 is the branch
```

The count is how many transactions the rule *wins*, not how many its glob could
match. Rule 2 above matches `LIDL SOFIA 4412` perfectly well, but rule 1 spells
out more of it and so claims it first; with nothing else here that says `LIDL`,
rule 2 is dead weight — which is the point of the screen. A rule can therefore
reach zero either by matching nothing or by being shadowed, and both are worth
deleting. Note that shadowing has nothing to do with the numbering: rule 2 would
be just as dead written above rule 1, because precedence is decided by how
specific a rule is and not by where it sits.

**Edit** opens a rule in the builder, **Delete** deletes it, and **Prune
unused** deletes every rule marked `✗` at once; both deletions ask first.
**Refresh counts** recounts against what is currently in the index. Editing and
deleting both work on `rules.toml` textually, so your comments, ordering and
formatting survive. A comment sitting directly above a deleted rule goes with
it, while one separated by a blank line is treated as a section heading and
left alone; an edited rule keeps its comments, since they say why it is there
and changing its glob rarely changes that.

### Transfer builder (`6`)

Same idea as the rule builder, for money moved between your own accounts. The
form names both sides — from account, from desc, to account, to desc — plus an
optional tolerance and note, and the preview beside it shows what the pair
would be: `▸` for a movement it matches end to end, `⚠` for a leg it catches on
one side and cannot pair with anything on the other.

```
    Date        Amount   Movement            Description
⚠  2026-04-01   500.00  checking → ?        TRANSFER TO SAVINGS
▸  2026-03-01   500.00  checking → savings  TRANSFER TO SAVINGS

1 pairs · 1 unpaired
```

The account fields complete exactly as the rule builder's do. `enter` (or
**Save transfer**) appends the definition to `rules.toml` and re-pairs
immediately. Saving keeps both account names in place and clears the two globs,
since the next transfer you write is usually the same route in the other
direction. The tolerance is cleared with them: carried over silently it would
loosen a route that never asked for one.

`Tolerance %` is the one field worth previewing before you save. Type a
percentage and the pairs it buys appear immediately, showing both amounts —
`500.00 → 495.00` — with what they cost summarised beside the counts:

```
1 pairs · 0 unpaired · 5.00 in fees
```

A half-written definition previews too: fill in one side and its legs show up as
unpaired, which is the quickest way to see that a glob is wrong before you have
written the other half.

### Transfers (`7`)

Every definition in file order, with what it currently pairs.

```
Transfers · 4 definitions · 1 leg(s) unpaired

#      From                       To                        Pairs  Unpaired  Tol    Note
1   ⚠  checking *TO SAVINGS*      savings *FROM CHECKING*    11     1                monthly saving
2      checking *TO BROKER*       traderepublic *FROM NLB*    4     0
3      checking *WIRE TO SAVINGS* savings *WIRE FROM CHECK*   2     0        1.5%   the bank keeps a fee
4   ✗  checking *TO OLD BANK*     savings *FROM OLD BANK*     0     0               closed in 2025
```

The two counts mean different things, which is the point of the screen. `⚠` is a
definition catching legs it cannot complete: a wrong glob on the other side, a
statement not imported yet, or a movement that genuinely went missing. `✗` is a
definition matching nothing at all, which is just dead weight.

Click a `⚠` row to see the legs behind it, newest first. Each one says which
side is missing and what that side would have had to look like:

```
Date        Amount   Movement       Missing        Would pair with
2026-04-01  500.00   checking → ?   arriving leg   +500.00 in savings matching *FROM CHECKING*,
                                                   dated 2026-03-27 to 2026-04-06
```

That is the search to run on the other statement. If it is not there, the
statement probably is not imported yet — when nothing at all from that account
is, the line says so. If something close is there, the difference tells you
which condition failed: a date outside the window, an amount off by a fee (see
[When the bank takes a fee](#when-the-bank-takes-a-fee)), or a description the
glob does not match. Across currencies the line says *any amount*, since only
the dates are checked there.

`Tol` is the definition's `tolerance_pct`, and it qualifies the counts beside
it: row 3's two pairs were matched on slack rather than on the amount agreeing.
It is blank for every definition that requires the exact amount — which is the
default, so an empty column means nothing here is pairing on a mismatch.

**Delete** deletes a definition and **Prune unmatched** deletes every `✗` one at
once, both after asking. Definitions marked `⚠` are never pruned — they are
doing something, just not finishing it, and deleting one would hide the problem
rather than fix it. **Refresh pairing** re-reads what is currently in the index.

## rules.toml

**The most specific rule wins**, so `*NIKOLA*` claims what it names even with a
broad `*NIK*` sitting above it, and a catch-all can be written anywhere without
swallowing the file. Patterns are globs (`*` and `?`) matched case-insensitively,
with whitespace collapsed.

Specificity is measured on what a rule spells out, in this order:

1. how many literal characters its patterns pin down — `*LIDL SOFIA*` (10)
   beats `*LIDL*` (4), and a bare `*` (0) is tried last of all. A rule setting
   both `match` and `type` has to satisfy both, so both count.
2. how few `*` it uses, the only wildcard that swallows a run of any length:
   `LIDL` fixes both ends where `*LIDL*` does not, so it goes first. (`?` is
   not counted either way: it fixes a length, not a character.)
3. whether it names an `account`, which is a narrowing the unscoped rule with
   the same patterns does not have.

Rules that tie on all three fall back to file order, and the earlier one wins —
which is what keeps appending a rule from disturbing one already written.

A rule matches on `match` (the description) and `type` (the bank's own
classification). Setting both is an "and": both must match.

`note` is free text for you, never for the matcher: why the rule is there, or
what the unrecognisable payee behind the glob actually is. It shows in the last
column of the rules screen. Ordinary `#` comments still work and are preserved
on delete; a `note` differs in that it survives a round trip through the tool,
so the rule builder can write one and the rules screen can show it.

```toml
[[rule]]
tag   = "groceries"
match = "*LIDL*"

[[rule]]
tag   = "salary"
match = "*ACME PAYROLL*"
note  = "paid on the 4th; the December one lands early"

# A rule can be limited to one account, and can require several patterns.
[[rule]]
account = "checking"
tag     = "rent"
match   = "*STANDING ORDER 4471*"

[[rule]]
type  = "CARD_PAYMENT"
match = "*LIDL*"
tag   = "groceries"
```

Every tag comes from this file, so a tag is never something you have to keep
safe: `money retag` recomputes all of them from the current rules and is safe
to run whenever you change it. A transaction no rule matches simply stays
untagged, and shows up under `money ls --untagged`, the `u` view, and
`(untagged)` in the report — unless it is one leg of a matched transfer, which
is already spoken for and is left out of all three.

### Transfers

Money moved between your own accounts is one movement the statements show
twice: an outflow leaving one account and an inflow arriving in another. A
`[[transfer]]` block names both legs, in the same file and with the same globs
as everything else.

```toml
[[transfer]]
from_account = "checking"
from_desc    = "*TO SAVINGS*"
to_account   = "savings"
to_desc      = "*FROM CHECKING*"
note         = "monthly saving, usually lands the next working day"

# Such movements are often only identifiable by the other side's account
# number, whatever the rest of the description happens to say. Every bank
# parser keeps that number in the description, so an ordinary glob finds it.
[[transfer]]
from_account = "checking"
from_desc    = "*SI56*"
to_account   = "traderepublic"
to_desc      = "*FROM NLB*"
```

All four `_account` / `_desc` keys are required; `note` and `tolerance_pct` are
optional, and `note`, as on a rule, never takes part in matching. `from_desc` is
matched against outflows on `from_account` and `to_desc` against inflows on
`to_account`, so a definition written backwards pairs nothing.

Two legs are the same movement when they match one definition and are dated no
more than **5 days** apart. Within one currency they must also be the exact
opposite amount, because a movement that arrives short is not obviously the same
movement leaving.

#### When the bank takes a fee

Some routes charge, and then the two statements really do disagree: 500.00
leaves and 495.00 arrives. `tolerance_pct` says how far short (or over) the
arriving leg may be, as a percentage of the leg that left:

```toml
[[transfer]]
from_account  = "checking"
from_desc     = "*WIRE TO SAVINGS*"
to_account    = "savings"
to_desc       = "*WIRE FROM CHECKING*"
tolerance_pct = 1.5
note          = "the bank keeps a wire fee"
```

It belongs to that one definition and loosens nothing else — every other route
still needs the exact amount. It defaults to 0, which is what every definition
written without the key means, and it must stay under 100: at 100% any amount
would pair with any other and the dates would be deciding alone. Keep it as
tight as the fee actually requires. Every percent of slack is also a percent
more chance of pairing two unrelated movements that happen to fall in the same
five days, and where two candidates are the same number of days away the nearer
amount wins.

**The difference is not forgiven, it is reported.** A pair leaves the report
entirely, so a fee hidden inside one would be spending that appears nowhere at
all. `money report` names it on the excluded line and the web app's report gives it
its own row (see below). Across currencies there is no fee to compute — the two
numbers are in different units — so a tolerance there means nothing and is
ignored.

**Across currencies the amount is not checked at all.** An exchange between two
of your own accounts — the same money in EUR and in BGN — has two unrelated
numbers, and the tool holds no exchange rates, so the dates carry the pairing on
their own and the nearest one wins. That is a weaker rule than the
same-currency one, deliberately: use the same route twice inside one window and
it will pair the wrong two legs. The transfer builder shows both amounts for
such a pair (`500.00 → 977.90`), which is the only place the rate the bank
actually used appears.

Definitions are evaluated in file order and each transaction belongs to at most
one transfer, so — exactly as with rules — the first definition to claim a leg
keeps it.

**A matched pair leaves the report entirely.** Both legs go together, so a
report over everything is unchanged in total by money you shuffled between your
own accounts, and `money report` says what it held out, per currency and per
direction — an exchange puts its two legs in different currencies, so each side
reports only the leg it saw:

```
transfers excluded: 4 legs in EUR, 2000.00 out, 1500.00 in
transfers excluded: 1 legs in BGN, 0.00 out, 977.90 in
```

Where a `tolerance_pct` definition let a fee through, the line says so too, and
that is the number your spending is short by:

```
transfers excluded: 2 legs in EUR, 500.00 out, 495.00 in, 5.00 in fees
```

The report screen (`3`) shows the same thing under its `TOTAL`, the fee on its
own row (for whichever period it is on):

```
TAG          CUR  OUT     IN      NET      N
groceries    EUR   20.00    0.00   -20.00  1
TOTAL        EUR   20.00    0.00   -20.00
(transfers)  EUR  500.00  495.00    -5.00  2
  ⤷ fees     EUR    5.00            -5.00  1
```

The fee is counted only for pairs whose legs are *both* in the report you are
looking at, for the same reason the line counts legs and not transfers: filter
to one account or one month and you usually have one side of a movement, and
half a pair cannot say what the other half received.

A paired leg shows as `(transfer)` in the tag column of the transaction list
and of `money ls`, so it reads as accounted for rather than as a blank waiting
for a rule. That label is display only — nothing writes it to the index, and it
is never offered as a tag to complete against. A rule tag wins where there is
one, since that is your own word for it.

An *unpaired* leg is not a transfer and still counts, tagged like anything
else. That is deliberate: money that left an account and cannot be shown to
have arrived is exactly what you want to see, not something to quietly drop.
`money import` and `money retag` report unpaired legs on stderr, and the
transfers screen (`7`) shows which definition they belong to.

The pairing is derived state, like the tags: it lives in the index, is
recomputed wholesale by `money retag` and after every import, and disappears
with the definition that made it.

## account.toml

Every account folder needs one. `currency` and `parser` are required.

```toml
name     = "Main Checking"
currency = "EUR"
parser   = "nlb"
# minor_digits = 2       # decimal places for this currency
# include = ["*.csv"]    # only treat matching files as statements
```

### Parsers

Three are built in, ported from the original Python extractors. A statement
layout is described in Go rather than in a table of column indexes, so there is
nothing else to configure — `parser` names one of these and that is all.

| `parser` | Statement | Notes |
| --- | --- | --- |
| `nlb` | NLB izpisek PDF | Wrapped descriptions are folded in from continuation lines, and the IBAN column is appended to the description. |
| `traderepublic` | Trade Republic PDF | Handles both the single-line and the stacked layout by measuring column positions. |
| `revolut` | `account-statement*.csv` | Skips non-COMPLETED rows, folds the fee into the amount. |

```toml
name     = "Trade Republic"
currency = "EUR"
parser   = "traderepublic"
```

The two PDF parsers shell out to `pdftotext -layout` (poppler-utils), exactly
as the Python versions did; its layout reconstruction is what makes the
column-based parsing work. A build made with `scripts/build-bundled.sh`
carries its own copy instead (see Install).

Amount parsing is shared and deliberately tolerant: `1.234,56`, `-45.20`,
`45,20-`, `(45.20)` and `45.20 EUR` all work, whichever parser reads them.

**Revolut and multiple currencies.** One export can hold several currencies,
but an account here has exactly one. Rows in other currencies are skipped and
reported at import. To keep them, give that currency its own account folder
with its own `currency` and `minor_digits` (JPY wants `minor_digits = 0`) and
put a copy or symlink of the export in it.

## Adding a parser

A new bank means a new parser. Drop it in `internal/parser` and register it —
no other package changes:

```go
func init() {
	parser.Register("bankx", func(acc *config.Account) (parser.Parser, error) {
		return &bankXParser{digits: acc.Digits()}, nil
	})
}

func (p *bankXParser) Parse(path string, acc *config.Account) ([]parser.RawTxn, error) {
	// ... return date (YYYY-MM-DD), description, and signed minor units
}
```

It becomes usable by setting `parser = "bankx"` in an account.toml. Use
`parser.ParseAmount` for the decimal handling rather than rolling your own.

## Balance checks

Statements that report a running balance are verified on import: each balance
must equal the previous one plus the transaction amount, the same check all
three original scripts made. A break means a row was missed or misparsed, and
is reported as a warning without stopping the import.

## Deduplication

Each transaction gets a fingerprint from its date, amount, normalised
description, and its ordinal among identical lines in the same statement. So
two identical purchases on one day are both kept, while re-importing an
overlapping statement adds nothing. Unchanged files are skipped by checksum
before parsing.

## Development

```
go build ./... && go test ./...
```