* server: SSE replay buffer, survives client disconnect
Opt in on POST /v1/chat/completions when the client sends
X-Stream-Resume: 1 and a non empty X-Conversation-Id. The conv id is
the session identity end to end, no extra opaque token. The drain
runs detached server side and buffers SSE bytes, the generation
survives HTTP disconnect, F5, or lets users switch from iOS Safari
to another app without losing the actively generated response.
Routes:
GET /v1/stream/<conv_id>?from=N replay
GET /v1/streams[?conversation_id=X] list, drives sidebar spinners
DELETE /v1/stream/<conv_id> Stop, idempotent
Router parent fans out to children for list and delete, probes on GET
to route to the owner, fans out DELETE on POST so "one session per
conv" holds across model swaps.
WebUI: the layout snapshots /v1/streams at mount and on
visibilitychange, the sidebar reflects live inferences across all
convs. The chat page reattaches on mount, append vs fresh is detected
from existing content so continue mid stream keeps its prefix.
update_slots: on llama_memory_seq_rm refusal at a deep position, full
clear of the seq and reprefill from zero instead of GGML_ABORT.
OAI strict path unchanged when the opt in headers are absent.
* server: create stream session only after post_tasks succeeds
* server, ui: drop X-Stream-Resume, X-Conversation-Id alone enables the replay buffer
* server: drop magic 17, derive the X-Conversation-Id header length from sizeof at build time
* refactor: address review feedback from ngxson
* server-context: cleaning
* server-stream: fix use-after-free on rd
Guard stop_producer with a shared alive flag, flipped by on_stream_end
before rd dies. Prevents a late cancel (session eviction by a later
POST on the same conv_id, or a DELETE arriving after the producer
ended) from touching a destroyed rd.
* ui: fix cross-conversation contamination
Scope streaming flags per conv so one finishing does not unflag the
others, guard discoverActiveStream against concurrent runs to avoid
duplicate attaches, and stop racing syncRemoteRunningStreams for the
sidebar set.
* server-http: keep request alive in detached SSE drain
The response next() lambda may reach into *request via &req long
after on_complete reset the request shared_ptr. Capture request in
the detached thread so it outlives the drain.
* ui: address review feedback from coder543
Forward Authorization to /v1/stream and /v1/streams fetches, the resumable routes
must obey --api-key like the rest of the API.
Wrap reader.read() in a try/catch, the underlying connection drop rejects with
TypeError instead of resolving done=true, treat it as a premature end of stream
so the existing resume loop kicks in.
Freeze the model at session start in chatStreamingStates.model and thread it
through cancel and resume, the dropdown selection may have changed since the
POST and the server side identity is fixed at that time.
* format
* ui: remove unused selectedModelName
* server-stream: poll session->is_cancelled() in stream_aware_should_stop
Address review feedback from coder543. The cancel propagation through
rd.stop() relies on the slot eventually processing the cancel task and
posting a result that notifies the recv condvar, remove_waiting_task_ids
does not notify directly. Add a defensive poll on session->is_cancelled()
so the producer-side next() loop exits on its next iteration after
cancel() without waiting for the cancel task to round trip through a slot.
* server-stream, ui: replace GET /v1/streams with POST /v1/streams/lookup
Address review feedback from coder543. Listing live sessions leaks the
conversation_id of every concurrent user, which defeats the random UUID
unguessability. The new route takes {conversation_ids: [...]} in the
body and returns matches only for the ids the caller already owns, so
foreign UUIDs stay private. The router fans out the same POST to every
child and aggregates, the WebUI passes the convs visible in its sidebar.
* ui: read conv ids from IndexedDB in syncRemoteRunningStreams
The conversations store is not hydrated yet at +layout onMount, so the
sidebar spinners stayed off for background convs until the user clicked
on them. Read straight from the DB to dodge the init race.
* server-models: deduplicate stream lookup timeouts behind one constant
* ui: extract visibility kick grace into a stream constant, bump to 1000 ms
* make it safer & more simple
* server-stream: survive client disconnect via stream_pipe::finish_producer
After the RAII rewrite the generation stopped the moment the client
disconnected. httplib bails its content provider on the is_peer_alive
check at the top of write_content_chunked, so returning true from the
provider never keeps it producing: the response resets, rd is destroyed
and its task gets cancelled.
Reinstate the disconnect survival inside the pipe. stream_pipe gains
finish_producer, which pumps the response next() into the ring buffer
until the generation ends, and mark_producer_done for the clean wire
end. server-http only triggers them: mark before sink.done on a clean
close, finish in on_complete when the peer left early. No detach, no
stream logic in server-http beyond the trigger, and the strict OAI path
is untouched when no pipe is attached.
Known limitation: finish_producer pumps synchronously on the http
worker, so a disconnected stream keeps its worker busy until the
generation ends. A follow-up will move the drain off the http worker so
no worker is held.
* server-stream: drain disconnected streams on a manager owned thread
The previous commit pumped the post disconnect drain synchronously in
on_complete, on the http worker, so a disconnected stream kept its
worker busy until the generation ended. Under a wave of reloads or tab
closes that pins workers from the pool.
Move the drain off the http worker. on_complete now hands the response
to stream_session_manager::adopt_orphan, which pumps it to completion on
a manager owned thread and releases the worker at once. One thread per
disconnected stream still generating, stored in a list, joined and
reaped on the next adopt, by the GC, and at shutdown. No detach, the
thread lifecycle is fully owned by the manager. needs_drain gates the
handoff so a cleanly finished stream never spawns a thread, and the
strict OAI path stays untouched when no pipe is attached.
stop_gc now cancels sessions before finalizing them, so an in flight
drain sees is_cancelled and exits instead of blocking the shutdown join
until the generation ends naturally.
* ui: add missing JSDoc
* server-stream: drain on the http worker, drop the manager thread
Address @ngxson review: httplib runs a large dynamic pool and a worker
blocked in next() sits on a condvar instead of burning cpu, so draining
the rest of the generation on that worker is fine and much simpler than
a dedicated thread.
on_complete calls finish_producer directly again. Removes adopt_orphan,
the orphan thread list and its reaping, the stop_gc session cancel that
only existed to unblock those threads, and the now dead drain_shutdown
flag.
* server-stream: split stream_pipe into producer and consumer classes
Address @ngxson review: one class covering both ends was messy. stream_pipe
is now a base holding the session and is_cancelled, with stream_pipe_producer
(write, mark_producer_done, finish_producer, cleanup, finalizes on destruct)
and stream_pipe_consumer (read only, no finalize) deriving from it.
Drops the is_producer_ discriminator and its runtime guards, the type now
encodes the role. res.spipe is retyped to shared_ptr<stream_pipe_producer>
since it is only ever a producer. No behavior change.
* server-stream: rename producer methods to unix pipe semantics
Address @ngxson review: mark_producer_done becomes done(), finish_producer
becomes close(), matching a unix pipe write end. The producer_done_ member
follows as done_. write() is unchanged. No behavior change.
* server, ui: route resumable streams via a conv map, persist resume identity
Address ngxson review: drop the polling probe, proxy_post records a conv_id ->
model map and the stream routes resolve the owning child with one lookup. The
map is the single source of truth, the ::model suffix stays for child session
uniqueness but the router never parses it.
UI: the server keys a session by the POST time identity (conv::model), but reload
probed with the bare conv id and missed model tagged sessions, so F5 stopped the
stream and sidebar spinners stayed off. Persist the model and rebuild the exact
identity on resume, single conv and bulk sidebar both send it.
Add unit coverage for the identity round trip.
* ui: resolve continue target by id to stop cross-conversation flash on switch
* ui: skip stream resume when the abort is intentional
* server: move the conv id to model map into a self contained tracker
Address review from ngxson: server_models held two mutexes side by side, the
global one and a bare conv_model_mu guarding a loose map, which made the locking
hard to follow. Wrap the map and its lock in a small conv_model_tracker struct
that owns its mutex, one mutex per struct. The remember, lookup and forget
methods move inline into the tracker, server_models exposes a single conv_models
member and the routes call models.conv_models.lookup and friends. No behavior
change, the map stays the single source of truth for routing resumable streams
to a child.
* ui: replace stream magic values with enums and shared constants
Address review from allozaur: lift the inline literals around the resumable
stream code into named symbols so the intent is explicit and reusable.
* ui: fold the stream resume and discovery helpers into ChatService
Address review from allozaur: drop the two standalone stream-*.service files.
They were used only by the chat service and store, carried no shared state, and
did not follow the static class pattern the other services use, so a separate
abstraction was not warranted. Move the helpers onto ChatService as static
methods. No behavior change, tests now exercise them through ChatService.
* docs: document the SSE replay buffer in server README-dev
Add the resumable streaming section, list stream_session_manager in the
backend component inventory, and link PR 23226 in the related PRs.
* ui: align attachServerStream call with onCompletionId param in handleStreamResponse
* server-http: rename del_ to del to match get and post
* ui: address review feedback from allozaur
* ui: drop duplicate SSE constants, keep sse.ts canonical
* ui: use svelte:document for the visibilitychange listener
address review from allozaur: replace the manual document.addEventListener
in onMount with a declarative <svelte:document onvisibilitychange>. svelte
handles attach, detach and SSR, so the typeof document guard and the onMount
cleanup go away. onMount keeps only the first load snapshot.
* server: trim redundant stream drain comments
Address review from ngxson
* server: balance and clean up stream comments
remove redundant comments and tighten the verbose ones across the resumable
stream code, keeping the concurrency and lifetime rationale that is not obvious
from the code. also fix two stale comments in server.cpp and server-models.h
that still described the old ::model suffix probe and fan out routing, now
replaced by the conv_id -> model map
Address review from ngxson
* ui: balance and clean up stream comments
dedup repeated rationale (frozen conv::model identity, the lookup privacy note,
the abort patterns) down to one canonical spot, tighten the verbose blocks, and
keep the concurrency and resume-offset reasoning. fix stale comments in
stream-identity.ts and chat.service.ts that still described the old loopback
probe and fan out routing, now the conv_id -> model map.
---------
Co-authored-by: Xuan Son Nguyen <son@huggingface.co>
* pi : update
* ci : fix ios build
* ci : fix andoroid
* ci : fix apple builds
* cmake : add install() for impl libraries
Add install(TARGETS <target> LIBRARY) for all -impl libraries that were
changed from STATIC to shared (controlled by BUILD_SHARED_LIBS) in
commit bb28c1fe2. Without this, cmake --install fails to copy the shared
libraries, causing runtime errors like:
llama-server: error while loading shared libraries: libllama-server-impl.so
Ref: https://github.com/ggml-org/llama.cpp/issues/23494#issuecomment-4512912515
Assisted-by: llama.cpp:local pi
* ci : fix xcframework build
* cmake : remove STATIC from impl libraries, allow BUILD_SHARED_LIBS control
Remove explicit STATIC from all -impl libraries (server, cli, completion, bench,
batched-bench, fit-params, quantize, perplexity) so BUILD_SHARED_LIBS controls
shared vs static linkage.
Add WINDOWS_EXPORT_ALL_SYMBOLS ON for proper DLL export on Windows.
Assisted-by: llama.cpp:local pi
* cmake : enable LLAMA_BUILD_APP by default
Assisted-by: llama.cpp:local pi
* ci : disable app in build-cmake-pkg.yml
* fix: Propagate version tag to WebUI asset download in self-hosted CI
* refactor: Apply suggestions from @CISC
Co-authored-by: Sigbjørn Skjæret <sigbjorn.skjaeret@scala.com>
* fix: Skip npm build when Node.js is not installed
Avoid 'no such file or directory' errors on CI runners that lack
Node.js. Check if npm is available via find_program before attempting
npm install + npm run build. Falls back to HF Bucket download.
* fix: Use + separator for ASSETS list to fix Windows build
Replace fragile \; escaping with a + separator when passing the
WebUI asset list via -DASSETS to the download script. On Windows,
the \; escaping was not reliably preserved through the CMake build
system, causing all asset filenames to be concatenated into one
(e.g., 'index.html;bundle.js;bundle.css;loading.html' as a single
file), which broke the HF Bucket download and subsequent xxd.cmake
step.
+ is safe because it is not special in cmd.exe (unlike | which is a
pipe operator), not special in CMake's -D argument parser, and not
a valid Windows filename character. CMakeLists.txt joins assets
with + and webui-download.cmake splits them back via regex.
* fix: Validate HF_WEBUI_VERSION environment variable with regex
Add input validation for the HF_WEBUI_VERSION env var to prevent
CMake list separator or path-traversal issues in stamp filenames
and download URLs. Rejects non-conforming characters early.
* fix: Remove 'latest' fallback for HF_WEBUI_VERSION
When needs.determine-tag.outputs.tag_name is empty, let CMake's
default resolution handle it (empty -> git-based version lookup)
instead of falling back to 'latest'. This ensures the sentinel
stamp file is consistent with CMake's resolution logic.
* fix: Demote checksum verification failure to warning instead of hard gate
* fix: End line character
---------
Co-authored-by: Sigbjørn Skjæret <sigbjorn.skjaeret@scala.com>
* introduce LLAMA_SERVER_NO_WEBUI
* LLAMA_SERVER_NO_WEBUI → LLAMA_BUILD_WEBUI
* LLAMA_BUILD_WEBUI ON by default not based on LLAMA_STANDALONE
* MIssed this
* Add useWebUi to package.nix
This option was introduced as a workaround because cpp-httplib could not
build on visionOS. Since it has been fixed and now compiles on all platforms,
we can remove it and simplify many things.
Signed-off-by: Adrien Gallouët <angt@huggingface.co>
* llama-server: recursive GGUF loading
Replace flat directory scan with recursive traversal using
std::filesystem::recursive_directory_iterator. Support for
nested vendor/model layouts (e.g. vendor/model/*.gguf).
Model name now reflects the relative path within --models-dir
instead of just the filename. Aggregate files by parent
directory via std::map before constructing local_model
* server : router config POC (INI-based per-model settings)
* server: address review feedback from @aldehir and @ngxson
PEG parser usage improvements:
- Simplify parser instantiation (remove arena indirection)
- Optimize grammar usage (ws instead of zero_or_more, remove optional wrapping)
- Fix last line without newline bug (+ operator instead of <<)
- Remove redundant end position check
Feature scope:
- Remove auto-reload feature (will be separate PR per @ngxson)
- Keep config.ini auto-creation and template generation
- Preserve per-model customization logic
Co-authored-by: aldehir <aldehir@users.noreply.github.com>
Co-authored-by: ngxson <ngxson@users.noreply.github.com>
* server: adopt aldehir's line-oriented PEG parser
Complete rewrite of INI parser grammar and visitor:
- Use p.chars(), p.negate(), p.any() instead of p.until()
- Support end-of-line comments (key=value # comment)
- Handle EOF without trailing newline correctly
- Strict identifier validation ([a-zA-Z_][a-zA-Z0-9_.-]*)
- Simplified visitor (no pending state, no trim needed)
- Grammar handles whitespace natively via eol rule
Business validation preserved:
- Reject section names starting with LLAMA_ARG_*
- Accept only keys starting with LLAMA_ARG_*
- Require explicit section before key-value pairs
Co-authored-by: aldehir <aldehir@users.noreply.github.com>
* server: fix CLI/env duplication in child processes
Children now receive minimal CLI args (executable, model, port, alias)
instead of inheriting all router args. Global settings pass through
LLAMA_ARG_* environment variables only, eliminating duplicate config
warnings.
Fixes: Router args like -ngl, -fa were passed both via CLI and env,
causing 'will be overwritten' warnings on every child spawn
* add common/preset.cpp
* fix compile
* cont
* allow custom-path models
* add falsey check
* server: fix router model discovery and child process spawning
- Sanitize model names: replace / and \ with _ for display
- Recursive directory scan with relative path storage
- Convert relative paths to absolute when spawning children
- Filter router control args from child processes
- Refresh args after port assignment for correct port value
- Fallback preset lookup for compatibility
- Fix missing argv[0]: store server binary path before base_args parsing
* Revert "server: fix router model discovery and child process spawning"
This reverts commit e3832b42eeea7fcb108995966c7584479f745857.
* clarify about "no-" prefix
* correct render_args() to include binary path
* also remove arg LLAMA_ARG_MODELS_PRESET for child
* add co-author for ini parser code
Co-authored-by: aldehir <hello@alde.dev>
* also set LLAMA_ARG_HOST
* add CHILD_ADDR
* Remove dead code
---------
Co-authored-by: aldehir <aldehir@users.noreply.github.com>
Co-authored-by: ngxson <ngxson@users.noreply.github.com>
Co-authored-by: Xuan Son Nguyen <son@huggingface.co>
Co-authored-by: aldehir <hello@alde.dev>
Previously, cmake was forcing `_WIN32_WINNT=0x0A00` for MinGW builds,
This caused "macro redefined" warnings with toolchains that define the version.
This also removes the `GGML_WIN_VER` variable as it is no longer needed.
Signed-off-by: Adrien Gallouët <angt@huggingface.co>
* git mv
* add server-context.h
* add server-context.h
* clean up headers
* cont : cleanup
* also expose server_response_reader (to be used by CLI)
* fix windows build
* decouple server_routes and server_http
---------
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* server: split HTTP into its own interface
* move server-http and httplib to its own file
* add the remaining endpoints
* fix exception/error handling
* renaming
* missing header
* fix missing windows header
* fix error responses from http layer
* fix slot save/restore handler
* fix case where only one stream chunk is returned
* add NOMINMAX
* do not call sink.write on empty data
* use safe_json_to_str for SSE
* clean up
* add some comments
* improve usage of next()
* bring back the "server is listening on" message
* more generic handler
* add req.headers
* move the chat template print to init()
* add req.path
* cont : minor
---------
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* Update docker.yml
修改docker.yml文件中的内容使其停止周期性的运行该workflow，如果想要运行该workflow可以手动启动
* feat:Modify the header file include path
1. There's no llava directory in the tools directory.
2. Because the command `target_include_directories(mtmd PUBLIC .)` is used in the `mtmd` CMakeLists.txt file, other targets that link against `mtmd` automatically include the `mtmd` directory as a search path for header files. Therefore, you can remove `target_include_directories(${TARGET} PRIVATE ../llava`` or use `target_include_directories(${TARGET} PRIVATE ../mtmd`` to explicitly require the `llama-server` target to use header files from `mtmd`.
* Restore the docker.yml file
* server : (experimental) vision support via libmtmd
* mtmd : add more api around mtmd_image_tokens
* mtmd : add more api around mtmd_image_tokens
* mtmd : ability to calc image hash
* shared_ptr for mtmd_image_tokens
* move hash to user-define ID (fixed)
* abstract out the batch management
* small fix
* refactor logic adding tokens to batch
* implement hashing image
* use FNV hash, now hash bitmap instead of file data
* allow decoding image embedding to be split into batches
* rm whitespace
* disable some features when mtmd is on
* fix --no-mmproj-offload
* mtmd_context_params no timings
* refactor server_inp to server_tokens
* fix the failing test case
* init
* wip
* working version
* add mtmd::bitmaps
* add test target
* rm redundant define
* test: mtmd_input_chunks_free
* rm outdated comment
* fix merging issue
* explicitly create mtmd::input_chunks
* mtmd_input_chunk_copy
* add clone()
* improve server_input struct
* clip : fix confused naming ffn_up and ffn_down
* rm ffn_i/o/g naming
* rename n_embd, n_ff
* small fix
* no check n_ff
* fix detokenize
* add const to various places
* add warning about breaking changes
* add c api
* helper: use mtmd_image_tokens_get_n_pos
* fix ctx_shift
* fix name shadowing
* more strict condition
* support remote image_url
* remote image_url log
* add CI test
* do not log base64
* add "has_multimodal" to /props
* remove dangling image
* speculative: use slot.cache_tokens.insert
* Apply suggestions from code review
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* rm can_be_detokenized
* on prmpt processing done, assert cache_tokens.size
* handle_completions_impl returns void
* adapt the new web ui
* update docs and hot topics
* rm assert
* small fix (2)
---------
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
